Pro AV Catalog
Crestron Electronics, Inc. - CLCI-DIMUEX-W
Request Information
All Products
crestron-electronics

Wireless In-Ceiling Dimmer, 230VAC

Series: Pyng/Green Light

Model: CLCI-DIMUEX-W

Part #: 6503839

  • 1-channel universal dimmer
  • Provides control of lighting fixtures
  • Compact surface-mount design for new or retrofit applications
  • No special wiring—installs inline at the device
  • Rated 300 W/VA load capacity
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

The CLCI-DIMUEX-W is a universal dimmer capable of dimming 230VAC lighting loads. Its ultra-slim design allows it to be installed in the ceiling, next to or near the fixture. The CLCI-DIMUEX-W communicates with the Crestron control system using infiNET EX® wireless technology, making it perfect for both new and retrofit applications.

The CLCI-DIMUEX-W installs inline without requiring special wiring and can be controlled via a standard light switch.

Universal Dimming

The CLCI-DIMUEX-W supports dimming incandescent, tungsten-halogen, magnetic low voltage, electronic low voltage and dimmable CFL loads. Load detection circuitry automatically determines forward- or reverse-phase dimming mode. Two sets of screw terminals (internally wired in parallel) enable easy wiring to more than one load of up to 300 W/VA.

Easy Loop-Thru Wiring

The CLCI-DIMUEX-W is powered using a set of high-voltage screw terminals and has a second set of terminals that are wired in parallel to easily daisy-chain additional CLCI-series devices. This provides a fast, clean installation when deploying multiple CLCI- devices and eliminates the need for additional wire connectors or extra gang boxes. In some retrofit applications, this lets you create more zones from what was originally wired.

Out-of-the-box Control via Standard Switch

The CLCI-DIMUEX-W provides built-in support for applications that require basic load control using a cost effective maintained or momentary switch to control the load. Use a maintained or momentary switch to perform basic on and off control. A momentary switch can also be used for basic dimming control by pressing and holding the button.

Complete Crestron Control

A Crestron control system connection allows the CLCI-DIMUEX-W to be controlled from any keypad, touch panel, remote, or mobile device. Tie in occupancy sensors and photocells together with Crestron Fusion® software for a complete solution to effectively manage energy.

Simple Setup

Setup is simple, especially when using a connected maintained or momentary switch. A specific series of button presses initiates the wireless device acquire mode, so there's no need to climb a ladder to join the device to the infiNET EX network.

  • 1-channel universal dimmer
  • Provides control of lighting fixtures
  • Compact surface-mount design for new or retrofit applications
  • No special wiring—installs inline at the device
  • Rated 300 W/VA load capacity
  • infiNET EX® wireless communication ensures reliable operation
  • Local controls for setup
  • Built-in support for control via standard momentary or maintained switch
  • Setup via on-board button or connected switch
  • Daisy-chain units for easy deployment
  • Operates using 220-240VAC power
  • Captive screw terminal connections
 
Request Information