Pro AV Catalog
LAN Power Systems - VP-5010
Request Information
All Products

19" Rack Mountable VIPER Video Surveillance 10-slot Chassis

Model: VP-5010

  • A single chassis can hold any combination of up to 10 modular cards
  • Provides high density output by allowing up to 40 fixed or 36 PTZ cameras
  • System expandability – start with four cameras and expand up to 40 cameras in a single chassis
  • Easy to install – fits in a standard EIA 19-inch rack
  • Requires only 2 rack unit spaces
Compare
Project List
Product Info
Tech Specs
Documents
This two racking unit, 19-inch rack-mountable chassis is capable of holding up to 10 VIPER modular cards. The chassis is used for both wiring closet and headend VIPER applications. A single chassis with appropriate modular cards is capable of handling up to 40 fixed cameras or 36 pan, tilt, zoom (PTZ) cameras, respectively. In addition, a combination of both fixed and PTZ cameras can be supported by a single chassis.

The chassis provides an output voltage of 28 VAC / 24 Amps and has an input voltage of 110 or 220 VAC (factory set). It is capable of supplying power to VIPER cards through the use of its bus backplane. In addition, PTZ control is capable of being supplied by using the VIPER PTZ card over a similar data bus backplane. This device even eliminates single-point failure in the event of a major fault within any VIPER module mounted in the chassis. In this situation, only the faulty VIPER card will shut down while all other cards will remain fully functional. This is extremely important in a mission critical video surveillance application. In addition, all VIPER cards located within the chassis are hot swappable, making it unnecessary to shutdown the entire video surveillance system when adding, removing or replacing cards.

  • A single chassis can hold any combination of up to 10 modular cards
  • Provides high density output by allowing up to 40 fixed or 36 PTZ cameras
  • System expandability – start with four cameras and expand up to 40 cameras in a single chassis
  • Easy to install – fits in a standard EIA 19-inch rack
  • Requires only 2 rack unit spaces
  • Individual power modules, hot-swappable slots, making it unnecessary to shutdown the mission critical video system during routine maintenance
 
Request Information
 

Suggested Products