The MultiView II DVI Transmitter opens up even more possibilities for the switching, distribution and extension of video, audio and serial signals over UTP cable. Accepts a digital 1080p DVI-D video input. The MultiView II DVI-TX is fully compatible with Magenta’s Mondo Matrix UTP-based switching platform, enabling digital signals to be infused into both new and existing Mondo-based projects. This ability adds even more adaptability to a switching system that can be configured in increments of 16 inputs/outputs, from 16x16 all the way to 256x512. The MultiView II DVI-TX features a local DVI monitor-output and a series of external buttons to enable users to easily configure various DDC, sync and fourth-pair (on DVI-TX base model only) modes of operation.
Compatible with MultiView receivers
Backwards compatible with Magenta’s Mondo Matrix switching platform
Converts 1080p DVI-D input to 1080p analog output
External configuration for DDC, sync and fourth pair modes
Duplex (SA) or (SAP) option modules:
Stereo L/R audio input: 10K ohms input impedance. A source device with 600 ohms maximum output impedance is recommended
RS-232 input:
4.75K ohms input impedance
Local-output Port Drive Impedance:
Standard DVI interface specifications apply DDC/EDID is supported
Audio Characteristics:
Standard (A) version: Left+Right summed audio
(232) version: This option module does not support audio
(SA) and (SAP) versions: Left/Right true stereo audio
Connectors::
Standard connectors:
(2) DVI-female: Video in/out
(1) RJ-45: MultiView CAT5 link output
(1) 4 position phoenix: Auxiliary signal input
(1) Coaxial (5.5mm OD, 2.5mm ID, 11mm L) jack: DC power input
For (232), (SA) or (SAP) versions:
(1) DB9-F: Serial I/O
EDID/DDC:
This module supports the EDID/DDC connections on the DVI-I connectors
HDMI:
It is usually possible to connect to HDMI devices (via a plug-adapter or cable-adapter) if the source device is providing un-protected content only (non-HDCP). Embedded HDMI audio is not supported
HDCP:
Not supported, even if a "HDMI-to-DVI" plug-adapter or cable-adapter is used
CEC:
Not supported, even if a "HDMI-to-DVI" plug-adapter or cable-adapter is used
Storage Temperature:
-4 to +140 °F (-20 to +60°C)
Humidity:
80% RH, non-condensing
Enclosure:
Steel (0.040”/1mm thick), Powder-coat black paint, white epoxy graphics
MTBF:
100,000 hours
Certifications:
CE, FCC Class A, IC Class / Class A, UL listed I.T.E Device
