The PHPM-SW-DV-WH is a switching power module, provides capability for zone on GRAFIK Eye control unit to switch fully loaded circuit of lighting. Used to switch incandescent, electronic low-voltage, magnetic low-voltage, HID, fluorescent ballasts, and neon/cold cathode lighting sources
*Utilizes Softswitch arcless switching technology. Provides power and switching for one zone. Up to 3 power modules may be wired on single GRAFIK Eye zone. 120V control power, 120 to 277V load power and 50/60Hz frequency, phase-to-neutral. Phase independent of control device/control voltage. Two LEDs on front of unit provide diagnostic information (visible when faceplate is removed). Accepts up to two 12AWG wires. Indoor use only. 15 BTU/hour maximum heat output of module. Surface or recess mounting. UL listed.
- Provides capability for zone on GRAFIK Eye control unit to switch fully loaded circuit of lighting
- Used to switch incandescent, electronic low-voltage, magnetic low-voltage, HID, fluorescent ballasts, and neon/cold cathode lighting sources
- Utilizes Softswitch arcless switching technology
- Provides power and switching for one zone
- Up to 3 power modules may be wired on single GRAFIK Eye zone
- 120V control power
- 120 to 277V load power
- 50/60Hz frequency, phase-to-neutral
- Phase independent of control device/control voltage
- Two LEDs on front of unit provide diagnostic information (visible when faceplate is removed)
- Accepts up to two 12AWG wires
- Indoor use only
- 15 BTU/hour maximum heat output of module
- Surface or recess mount
- UL listed
