PESA’s Quadbox 4X2 Series allows any one of four coax inputs to be switched to fiber output port one and output port two. High definition video signals for ASI/SDI, HD-SDI, or 3G-SDI can be passed through each port. The Quadbox 4X2 is compliant with SMPTE 259M, 292M, 372M and 424M. Each Quadbox supports high definition video with or without embedded audio and data, as well as DVB/ASI. Based on a 1310nm SFP fiber module, you can be asssured that each signal is immune to video pathological signals for the entire length of the fiber interconnect.
The Quadbox fiber system is the lowest total cost solution for converting copper-based signals to fiber-based transmission paths and works exceptionally well with all PESA HD router systems. Each Quadbox comes with a built-in Ethernet port and USB port for easy setup and diagnostics. Up to four modules can be loaded in a 1RU frame with support for redundant power. Setup is simple with the supplied GUI interface.
- 1310 nm optical laser transport signals
- Supports both multimode and singlemode cabling
- Supports both 62.5µm and 50µm multimode
- HD-SDI, 3G-SDI, or Dual-Link HD-SDI
- Supports SMPTE 259M-C, 292M, 372M, and 424M
- Video data rates from 143Mbps to 3.0Gbps
- Optional model available to support 143Mbps to 1.5Gbps
- Software setting for reclocking or by-pass mode
- Extend copper cabling up to 50m from module
- Low power consumption, less than 4.5W per module
- Up to four units in a 1RU space
- Up to 16 input or output channels in 1RU
- Ethernet port for network capabilities
- USB 2.0 for local setup and diagnostics
- Optional 1RU frame with redundant power
- Optional under-the-table mounting bracket for single modules
- 12VDC, 90-240VAC 60/50Hz power brick for stand-alone modules
- 90-240 VAC, 60/50Hz redundant power supply for the 1RU frame
