The WM8976 is a low power codec with integrated pre-amp for a differential mic, and includes drivers for speakers, headphone and differential or stereo line output. External component requirements are reduced as no separate microphone or headphone amplifiers are required.Advanced on-chip digital signal processing includes a five-band equalizer, a mixed-signal automatic level control for the microphone or line input through the A/D converter, as well as a purely digital limiter function for record or playback. Additional digital filtering options are available in the ADC path to provide application filtering such as ’wind noise reduction’. The WM8976 codec can operate as a master or a slave. An internal PLL can generate all required audio clocks for the codec from common reference clock frequencies, such as 12 and 13 MHz. Individual sections of the chip can also be powered down under software control.
On-chip headphone driver with ’capless’ option
40mW output power into 16 ohm/3.3V SPKVDD
1W output power into 8 ohm BTL speaker/5V SPKVDD
Capable of driving piezo speakers
Stereo speaker drive configuration
Differential or single-ended microphone interface
Programmable preamp gain
Psuedo-differential input with common mode rejection
Programmable ALC/noise gate in ADC path
Low-noise bias supplied for electret microphones
Enhanced 3-D function for improved stereo separation
Digital playback limiter
5-band equalizer (record or playback)
Programmable ADC high pass filter (wind noise reduction)
Programmable ADC notch filter
Aux inputs for stereo analog input signals or ’beep’
Decoder or Encoder Signal Type - Audio
Decoder/Encoder Type - Analog to Digital Decoder/Encoder
Decoder/Encoder Type - Digital to Analog Decoder/Encoder
