The WP-580R is a high-performance, HDBaseT twisted pair wall plate receiver for HDMI signals. The WP-580R receives an HDBaseT twisted pair signal from the WP-580T and converts it back into HDMI signals.
Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel).
HDTV Compatible.
HDCP Compliance.
HDBaseT™ Technology.
HDMI Support - Deep Color, x.v.Color™, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS?HD, CEC.
3D Pass-Through.
EDID PassThru - Passes EDID signals between the source and display.
2K & 4K Support.
System Range - Up to 70m (230ft).
Cable - Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC?DGKat524, BC?DGKat623 and BC?DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The
Indicators - Status LEDs for input, output, link and power.
HDBaseT - Yes
Receiver/Transmitter Cable Type - Twisted Pair
Receiver/Transmitter Format Type - HDMI
Supported Resolution - 2K (2048x1080)
Supported Resolution - 4K (4096x2400)
RX RS-232 - No
Spec Sheet available - Yes
Transmission Range:
230 ft
Depth:
1.29 in
Height:
3.12 in
Width:
4.88 in
Product Weight:
1.40 lbs
Inputs:
1 HDBaseT twisted pair RJ-45 connector.
Outputs:
1 HDMI connector.
Bandwidth:
10.2Gbps (3.4Gbps per graphic channel).
COMPLIANCE WITH HDMI STANDARD:
Supports HDMI and HDCP.
Power Consumption:
12V DC, 380mA.
Dimensions:
12.4cm x 3.12cm x 7.9cm (4.88" x 1.29" x 3.12") US; 15.1cm x 2.96cm x 8.6cm (5.95" x 1.17" x 3.39"), 15.1cm x 2.96cm x 8.0cm (5.95" x 1.17" x 3.15") EU (W, D, H).
